Journals

1. Amir Babak Ansari. Multi-objective size optimization and economic analysis of a hydrogen-based standalone hybrid energy system for a health care center. International Journal of Hydrogen Energy, 62 (2024) 1154–1170. doi: https://doi.org/10.1016/j.ijhydene.2024.03.165

2. Seyyed Abdolreza Gandjalikhan Nassab, Amir Babak Ansari, and Ebrahim Jahanshahi Javaran. Waste Heat Recovery of Exhaust Gas in a Ribbed Double-Pipe Heat Exchanger. Heat Transfer Engineering (2023), 44:15, 1372–1390. doi: https://doi.org/10.1080/01457632.2022.2134078

3. Amir Babak Ansari, Reduced-order modeling of PEM fuel cell based on POD and PODI: an efficient approach toward combining highest accuracy with real-time performance. Reduced-order modeling of PEM fuel cell based on POD and PODI: an efficient approach toward combining highest accuracy with real-time performance, 48: (2023) 29327-29349. doi: https://doi.org/10.1016/j.ijhydene.2023.04.096

4. Mohammad Foruzan Nia, Hamed Farzad, Amir Babak Ansari, Maryam Ghodrat, Seyyed Abdolreza Gandjalikhan Nassab, Masud Behnia. Performance improvement of a tubular heat exchanger by tube arrangement optimization using simulated annealing algorithm and blocked-off method, Thermal Science and Engineering Progress 40 (2023) 101793. doi: https://doi.org/10.1016/j.tsep.2023.101793

5. Amir Babak Ansari, Seyyed Abdolreza Gandjalikhan Nassab. Numerical investigation on thermal performance enhancement of a flat-plate natural flow double-pass solar air heater – The effect of the absorber plate. Energy Equipment and Systems, 10:4 (2022) 353-374. doi:

6. Amir Babak Ansari, Vahid Esfahanian, Farschad Torabi. Thermal-electrochemical simulation of lead-acid battery using reduced-order model based on proper orthogonal decomposition for real-time monitoring purposes. Journal of Energy Storage 44 (2021) 103491 doi: https://doi.org/10.1016/j.est.2021.103491

7. Mohammad Foruzan Nia, Seyyed Abdolreza Gandjalikhan Nassab, Amir Babak Ansari. Numerical simulation of air heating by the recovered waste heat from the radiating exhaust gas flows in a plate heat exchanger. International Journal of Thermal Sciences 161 (2021): 106728. doi: https://doi.org/10.1016/j.ijthermalsci.2020.106728

8. Mohammad Foruzan Nia, Amir Babak Ansari, Seyyed Abdolreza Gandjalikhan Nassab. Transient combined volumetric radiation and free convection in a chamber with a hollow heat-generating solid body. International Communications in Heat and Mass Transfer 119 (2020): 104937. doi: https://doi.org/10.1016/j.icheatmasstransfer.2020.104937

9. Mohammad Foruzan Nia, Seyyed Abdolreza Gandjalikhan Nassab, Amir Babak Ansari. Numerical simulation of flow and thermal behavior of radiating gas flow in plane solar heaters. Journal of Thermal Science and Engineering Applications 12 (3) (2020): 031008 doi: https://doi.org/10.1115/1.4044756

10. Mohammad Foruzan Nia, Seyyed Abdolreza Gandjalikhan Nassab, Amir Babak Ansari. Transient numerical simulation of multiple pane windows filling with radiating gas. International Communications in Heat and Mass Transfer 108 (2019): 104291. doi: https://doi.org/10.1016/j.icheatmasstransfer.2019.104291

11. Yahya Sheikhnejad, Amir Babak Ansari, J Ferreira, N Martins. Effects of parallel magnet bars and partially filled porous media on magneto-thermo-hydro-dynamic characteristics of pipe ferroconvection. International Journal of Heat and Mass Transfer 136 (2019): 1273-1281. doi: https://doi.org/10.1016/j.ijheatmasstransfer.2019.03.085

12. Mohammad Foruzan Nia, Seyyed Abdolreza Gandjalikhan Nassab, and Amir Babak Ansari. Transient combined natural convection and radiation in a double space cavity with conducting walls. International Journal of Thermal Sciences 128 (2018): 94-104. doi: https://doi.org/10.1016/j.ijthermalsci.2018.01.021

13. Amir Babak Ansari, Vahid Esfahanian, and Farschad Torabi. Discharge, rest and charge simulation of lead-acid batteries using an efficient reduced order model based on proper orthogonal decomposition. Applied Energy 173 (2016): 152-167. doi: https://doi.org/10.1016/j.apenergy.2016.04.008

14. Vahid Esfahanian, Amir Babak Ansari, and Farschad Torabi. Simulation of lead-acid battery using model order reduction. Journal of Power Sources 279 (2015): 294-305. doi: https://doi.org/10.1016/j.jpowsour.2014.12.149

15. Amir Asghari, Seyyed Abdolreza Gandjalikhan Nassab, and Ansari Babak Ansari. Numerical study of combined radiation and turbulent mixed convection heat transfer in a compartment containing participating media. Journal of Mechanics 31.4 (2015): 467-480. doi: https://doi.org/10.1017/jmech.2015.24

16. Meysam Atashafrooz, Seyyed Abdolreza Gandjalikhan Nassab, and Amir Babak Ansari. Numerical investigation of entropy generation in laminar forced convection flow over inclined backward and forward facing steps in a duct under bleeding condition. Thermal Science 18.2 (2014): 479-492. doi: https://www.doi.org/10.2298/TSCI110531026A

17. Vahid Esfahanian, Amir Babak Ansari, Hassan Bahramian, Pooyan Kheirkhah, and Goodarz Ahmadi. Design parameter study on the performance of lead-acid batteries. Journal of Mechanical Science and Technology 28.6 (2014): 2221-2229. doi: https://doi.org/10.1007/s12206-014-0123-5

18. Vahid Esfahanian, Pooyan Kheirkhah, Hassan Bahramian, Amir Babak Ansari, and Goodarz Ahmadi. The Effect of Electrode Parameters on Lead-Acid Battery Performance. Advanced Materials Research 651 (2013): 492-498. doi: https://doi.org/10.4028/www.scientific.net/AMR.651.492

19. Amir Babak Ansari, and Seyyed Abdolreza Gandjalikhan Nassab. Forced convection of radiating gas over an inclined backward facing step using the blocked-off method. Thermal Science 17.3 (2013): 773-786. doi: https://www.doi.org/10.2298/TSCI110112132A

20. Amir Babak Ansari, and Seyyed Abdolreza Gandjalikhan Nassab . Combined gas radiation and laminar forced convection flow adjacent to a forward facing step in a duct. International Journal of Numerical Methods for Heat & Fluid Flow 23.2 (2013): 320-335. doi: https://doi.org/10.1108/09615531311293498

21. Mohsen Shamsi, Seyyed Abdolreza Gandjalikhan Nassab, and Amir Babak Ansari. Ivestigation of entropy generation in 3-d laminar forced convection flow over a backward facing step with bleeding. International Journal of Engineering-Transactions A: Basics 25.4 (2012): 379-388. doi:

22. Vahid Golkarfard, Seyyed Abdolreza Gandjalikhan Nassab, Amir Babak Ansari, Golam Hosain Bagheri. Numerical investigation on deposition of solid particles in a lid-driven square cavity with inner heated obstacles. Advanced Powder Technology 23.6 (2012): 736-743. doi: https://doi.org/10.1016/j.apt.2011.09.006

23. Vahid Golkarfard, Seyyed Abdolreza Gandjalikhan Nassab, and Amir Babak Ansari. Simulation of solid particles in combined conduction, convection and radiation gas flow over a backward-facing step in a duct. Applied Mechanics and Materials. 110 (2012): 5276-5282. doi: https://doi.org/10.4028/www.scientific.net/AMM.110-116.5276

24. Amir Babak Ansari, and Seyyed Abdolreza Gandjalikhan Nassab. Study of laminar forced convection of radiating gas over an inclined backward facing step under bleeding condition using the blocked-off method. Journal of Heat Transfer 133.7 (2011): 072702. doi: https://www.doi.org/10.1115/1.4003607

Conferences

1. Vahid Esfahanian, Hamid Afshari, Aarman Pouyaei, Amir Babak Ansari, “Three-Dimensional Numerical Simulation of Lead-Acid Battery,” 10th International Conference on Lead-Acid Batteries LABAT'2017, 13-16 June 2017, Golden Sands Resorts, Bulgaria. doi:

2. Vahid Esfahanian, Farzin Chaychizadeh, Hojat Dehghandorost, Amir Babak Ansari, Hosain Shokouhmand, “Efficient Simulation of Lead-Acid Battery Using Improved Mathematical Model,” 10th International Conference on Lead-Acid Batteries LABAT'2017, 13-16 June 2017, Golden Sands Resorts, Bulgaria. doi:

3. Vahid Esfahanian, Amir Babak Ansari and Farschad Torabi, “Reduced Order Modeling of 2-D Lead-Acid Battery Considering Free Convection Effect,” 10th International Conference on Lead-Acid Batteries LABAT'2017, 13-16 June 2017, Golden Sands Resorts, Bulgaria. doi:

4. Vahid Esfahanian and Amir Babak Ansari, “Numerical simulation of lead-acid batteries using reduced order modeling based on proper orthogonal decomposition,” 3th International Conference on Mechanical Engineering Research, 3th ICMER2015, 18-19 August 2015, Kuanta, Pahang, Malaysia. doi:

5. Vahid Esfahanian, Amir Babak Ansari, Khosro Ashrafi and Hamoon Pourmirzaagha, “Reduced order modeling of lead acid batteries,” The 8th International Chemical Engineering Congress & Exhibition (IChEC 2014), February 24-27, Kish Island, Iran. doi:

6. Vahid Esfahanian, Sadegh Hasanpour, Amir Babak Ansari, Nima Narjabadifam and Peyman Olad, “The optimization of lead-acid battery electrode thickness using pso algorithm by using neural networks,” 9th International Conference on Lead-Acid Batteries LABAT'2014, 10-13 June 2014, Albena, Bulgaria. doi:

7. Vahid Esfahanian, Nima Narjabadifam, Peyman Olad, Amir Babak Ansari and Sadegh Hasanpour, “CFD simulation of lead-acid batteries: effect of temperature variation,” 9th International Conference on Lead-Acid Batteries LABAT'2014, 10-13 June 2014, Albena, Bulgaria. doi:

8. Vahid Esfahanian and Amir Babak Ansari, “Simulation of lead-acid battery using model order reduction,” 9th International Conference on Lead-Acid Batteries LABAT'2014, 10-13 June 2014, Albena, Bulgaria. doi:

9. Vahid Esfahanian, Farschad Torabi, Amir Babak Ansari and Hamoon Pourmirzaagha, “CFD Simulation of Lead-Acid Batteries – a Review”, 2nd National Iranian Battery Conference, 9 October 2013, Hotel Olympic, Tehran. doi:

10. Vahid Golkarfard, Seyyed Abdolreza Gandjalikhan Nasab, Amir Babak Ansari, Mazyar Salmanzadeh and Gholam hosain Bagheri, “Thermophoretic Deposition of Particles in a 2D Backward-facing Step Duct under Radiative Heat Transfer Effect”, 19th Annual International Conference on Mechanical Engineering-ISME2011, 10-12 May, 2011, The University of Birjand, Birjand, Iran. doi:

11. Vahid Golkarfard, Seyyed Abdolreza Gandjalikhan Nasab and Amir Babak Ansari and Golam Hosain Bagheri, “Deposition of particles in laminar mixed-convection flow in a lid-driven cavity with heated obstacles”, 19th Annual International Conference on Mechanical Engineering-ISME2011, 10-12 May, 2011, The University of Birjand, Birjand, Iran. doi:

Books